71M6545/71M6545H Data Sheet
Table 39: Clock System Summary
Clock
Derived
From
Fixed Frequency or Range
PLL_FAST =1 PLL_FAST =0 Controlled by
Function
OSC
Crystal
32.768 kHz
Crystal clock
MCK
CKCE
CKADC
CKMPU
CKICE
CKOPTMOD
Crystal/PLL
MCK
MCK
MCK
MCK
MCK
19.660800 MHz
(600*CK32)
4.9152 MHz
4.9152 MHz,
2.4576 MHz
4.9152 MHz …
307.2 kHz
9.8304 MHz…
614.4 kHz
38.40 kHz
6.291456 MHz
(192*CK32)
1.5728 MHz
1.572864 MHz,
0.786432 MHz
1.572864 MHz…
98.304 kHz
3.145728 MHz …
196.608 kHz
38.6 kHz
PLL_FAST
ADC_DIV
MPU_DIV[2:0]
MPU_DIV[2:0]
Master clock
CE clock
ADC clock
MPU clock
ICE clock
Optical
UART
Modulation
CK32
MCK
32.768 kHz
32 kHz clock
2.5.4
Real-Time Clock (RTC)
2.5.4.1 RTC General Description
The RTC is driven directly by the crystal oscillator and is powered by either the V3P3SYS pin or the
VBAT_RTC pin, depending on the V3OK internal bit. The RTC consists of a counter chain and output
registers. The counter chain consists of registers for seconds, minutes, hours, day of week, day of month,
month, and year. The chain registers are supported by a shadow register that facilitates read and write
operations.
Table 40 shows the I/O RAM registers for accessing the RTC.
2.5.4.2 Accessing the RTC
Two bits, RTC_RD (I/O RAM 0x2890[6] ) and RTC_WR (I/O RAM 0x2890[7]) , control the behavior of the
shadow register.
When RTC_RD is low, the shadow register is updated by the RTC after each two milliseconds. When
RTC_RD is high, this update is halted and the shadow register contents become stationary and are suitable
to be read by the MPU. Thus, when the MPU wishes to read the RTC, it freezes the shadow register by
setting the RTC_RD bit, reads the shadow register, and then lowers the RTC_RD bit to let updates to the
shadow register resume. Since the RTC clock is only 500 Hz, there may be a delay of approximately
2 ms from when the RTC_RD bit is lowered until the shadow register receives its first update. Reads to
RTC_RD continues to return a one until the first shadow update occurs.
When RTC_WR is high, the update of the shadow register is also inhibited. During this time, the MPU may
overwrite the contents of the shadow register. When RTC_WR is lowered, the shadow register is written into
the RTC counter on the next 500Hz RTC clock. A ‘change’ bit is included for each word in the shadow
register to ensure that only programmed words are updated when the MPU writes a zero to RTC_WR .
Reads of RTC_WR returns one until the counter has actually been updated by the register.
The sub-second register of the RTC, RTC_SBSC (I/O RAM 0x2892) , can be read by the MPU after the one
second interrupt and before reaching the next one second boundary. RTC_SBSC contains the count since
the last full second, in 1/128 second nominal clock periods, until the next one-second boundary. When the
RST_SUBSEC bit is written, the SUBSEC counter is restarted, counting from 0 to 127. Reading and resetting
the sub-second counter can be used as part of an algorithm to accurately set the RTC.
The RTC is capable of processing leap years. Each counter has its own output register. The RTC chain
registers are not be affected by the reset pin, watchdog timer resets, or by transitions between the SLP
mode and mission mode.
v2
49
相关PDF资料
720-10007-00300 CBL D-SUB 9PIN FMAL-25PIN FML 3M
720-10010-00025 CBL DSUB 9PIN FML-25PIN MAL .25M
720-10020-00300 CBL DSUB 9PIN FML-9PIN MALE 3M
720-10021-00300 CBL DSUB 9PIN FML-9PIN FEMAL 3M
72231-0881 8 POS T/P SHLD 4 GR ASSY
7250B PANEL KIT BOTTOM FOR R-1220 CASE
731-10061-00200 CBL DSUB HD 15FEMAL-15MALE 2.0M
73304-111 MJ HOR ESMT 8/8 H/O T&R
相关代理商/技术参数
71M6545-IGTR/F 功能描述:计量片上系统 - SoC Metrology Proc. (3P 64K Flsh .1%) RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6545T-IGT/F 制造商:Maxim Integrated Products 功能描述:METROLOGY PROCESSORS - Rail/Tube
71M6545T-IGTR/F 制造商:Maxim Integrated Products 功能描述:3-PHASE AFE, 32KB FLASH, PRES TEMP SENSOR - Tape and Reel
71M6601 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:On-Chip Temperature Sensor Enables Localized Digital Temperature On-Chip Power Monitoring
71M6601-IF 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:On-Chip Temperature Sensor Enables Localized Digital Temperature On-Chip Power Monitoring
71M6601-IL 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:On-Chip Temperature Sensor Enables Localized Digital Temperature On-Chip Power Monitoring
71M6601-IL/F 功能描述:模数转换器 - ADC Isolated Sensor IC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32
71M6601-ILF 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:On-Chip Temperature Sensor Enables Localized Digital Temperature On-Chip Power Monitoring